for 120 VAC Systems
FlipFlop32 for DC Systems
Bi-stable or latching function to turn load on with momentary
or maintained input signal.
Two output poles, independently convertible from normally-open
Complete isolation between line, load, and logic terminals.
Compact size. DIN rail or panel mount.
LED status indicator for each output pole.
Regent’s 5 Year “No-Questions-Asked” Warranty.
Alternating product flow on packaging lines between two conveyors
Skipping every other cycle on a printing or gluing operation
Alternately diverting containers on a labeling or sealing line
Duplex pump control
Alternating between two timing cycles for filling or gluing
Alternating tool feed
Forward/Reverse cycle control
The FlipFlop is an all-solid-state relay
which provides the flip-flop, or toggle function. The relay can provide
alternate energization of solenoids, pneumatic valves, motor starters,
solid-state control devices, and other industrial loads. The FlipFlop
is a bi-stable relay, and is designed to replace electromechanical ratchet
relays for improved reliability and speed.
The FlipFlop is pulse triggered, so control voltage may be momentary
or maintained. Input can be provided by mechanical limit switches, proximity
switches, photo-electric controls, programmable controller output modules
or other solid-state devices. Relays can be cascaded to implement an n-stage
binary shift register.
1. There is complete electrical isolation among Line, Load, and Logic
circuits. They may be used in separate and different voltage
circuits or systems.
2. Terminals L2 (or -) and/or 2 may be grounded.
3. For loads greater than 1 amp, do not parallel solid-state switches.
The current will not divide equally and may result in damage.
4. Normally-closed switches require power on L1,L2 (or +,-) terminals
for proper operation.
5. Switching time delay is the delay between A,B turn-off and C,D turn-on
(or vice versa) to prevent overlap.
(L1,L2 or +,- terminals)
120 VAC +/- 20%, 50/60 Hz
15 mA burden
12-30 VDC, 5% ripple max,
35 mA burden
Logic Input (1,2 terminals)
120 VAC +/- 20%, 50/60 Hz,
25 mA burden (will not operate on leakage current below 10 mA)